NeuroTrac Digital TENS Machine - NeuroTrac 數字顯示，經皮神經電刺激儀

NeuroTrac TENS

The NeuroTrac TENS machine is an advanced digital dual channel TENS unit suitable for all types of pain relief. The NeuroTrac TENS has 12 pre-set programmes and 2 customisable programmes. It features 3 different treatment modes (conventional TENS or normal mode, burst mode and modulation mode). All these features help to provide the user with complete flexibility in their pain relief treatment. What do I get? The NeuroTrac TENS unit comes with a set of four electrode pads, the lead wires to connect the electrode pads to the unit, a 9v battery and a handy storage NeuroTrac bag. As well as the Operators Manual, containing all the information needed about the unit and programmes, also included is the Electrode Placement Manual, guiding you through which electrode pad shapes and sizes to use, and where to place them to achieve the best results.

The NeuroTrac TENS's 12 clinically based pre-set programmes are designed to help with all types of pain relief. Conventional TENS or Normal Mode enables the user to select any rate between 2 Hz - 200 Hz and a pulse width between 50 µS - 300 µS. This is the most frequently used of the three modes. The most common selection is 80 Hz with a 200 µS pulse width. Burst Mode is comparable to the low rate TENS technique except that each low rate pulse is substituted for by a short BURST of 9 pulses (200 µS) at 150 Hz. It is a combination of conventional and low rate TENS. The burst mode is often referred to as acupuncture like TENS. Modulation Mode is designed to help prevent nerve accommodation that some patient's experience. It is achieved by continuously cycling the pulse width and rate.

For some people chronic pain can have a huge impact on their state of mind and physical ability. They may find they do not wish to rely on pain relief medications, which can have side effects such as dizziness, drowsiness, headaches and nausea. Not only this, but pain relief medications tend to block pain signals around the entire body, which isn't necessarily a good thing. When we feel pain it is the body's process of informing us that something is wrong. To feel pain is important, without this feeling abnormal conditions may go undetected, creating damage or injury to critical parts of the body. It is far safer to be able to inhibit pain in just the one area of the body that is most afflicted. TENS pain relief allows you to do this. It works by delivering mild electronic stimulation to the nerve fibres via surface skin electrodes. The TENS stimulation acts as a 'Gate Control' to block pain transmission, stopping pain signals from being sent to the brain. It only works on the nerves in the area that requires treatment, and there are no side effects. NeuroTrac is one of the leading UK manufacturers of TENS and EMS devices, producing high quality, user-friendly medical devices that are safe and simple to use at home. The NeuroTrac TENS has an 80% efficacy rate, and is suitable for any type of muscular or joint pain.

Specifications:

Dual channel: individually isolated circuits. Amplitude: 0 - 80 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA. Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts. Waveform: Asymmetrical, rectangular bi-phasic with zero DC current. Selectable pulse width: 50mS -300mS [2% accuracy]. Pulse Rate selection: in the continuous mode 2 Hz - 200 Hz [2% accuracy]. Mode: Continuous, Burst or Modulated. Burst mode: Bursts of 9 pulses [200 mS] at 150 Hz, repeating twice every second. Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation. Width starting at 200 mS and decreasing exponentially to 100 mS in three seconds and then returning back to 200 mS in the next three seconds. Rate starting at 100 Hz, decreasing exponentially to 65 Hz and then returning to 100 Hz. Time duration of the treatment selectable: 1 minute to 12 hours. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.

Features:

Dual Channel TENS
High Efficiency Tens unit for improved pain relief
12 pre-set programmes and 3 custom programmes giving a high degree of flexibility to set up the programme to meet your individual requirements
Improved Pulse Shape that keeps its shape intact at high current loads resulting in improved pain relief
Lock mode to record time in use and average current used.
2 year warranty
Proven TENS unit for reliability
The NeuroTrac Tens Machine comes complete with:
1 x 9V Battery
One Packet of 50mm x 50mm skin electrodes
Two Lead Wires
Operating manual
Plastic carry case
Manufactures one year warranty on the machine only. 

NeuroTrac TENS

NeuroTrac TENS機是一種先進的數字雙通道TENS裝置，適用於緩解所有類型的疼痛緩解。NeuroTrac TENS有12個預設的程序和2個可定製的程序。它具有3種不同的治療模式（傳統的TENS或正常模式、爆發模式和調製模式）。所有這些特點有助於為用戶提供完全靈活的疼痛緩解治療。NeuroTrac TENS裝置包括一套四個電極片、連接電極片和裝置的導線、一個9v電池和一個便於携帶的NeuroTrac儲存袋。除了操作手冊，其中包含所有關於設備和程序的信息，還包括電極使用手冊，指導你使用哪種形狀和尺寸的電極墊，以及將它們放置在哪裏以達到最佳效果。

NeuroTrac TENS的12個基於臨床的預設程序被設計用來幫助緩解各種類型的疼痛。傳統的TENS或正常模式使用戶能夠選擇2Hz-200Hz之間的任何速率和50μS-300μS之間的脈沖寬度。這是三種模式中最經常使用的一種。最常見的選擇是80赫茲，脈沖寬度為200微秒。突發模式與低速TENS技術相當，只是每個低速脈沖被150赫茲的9個脈沖（200微秒）的短突發所取代。它是傳統和低速率TENS的結合。脈沖模式通常被稱為類似針灸的TENS。調製模式的設計是為了幫助防止一些病人所經歷的神經適應。它是通過連續循環的脈沖寬度和速率實現的。

對於一些人來說，慢性疼痛會對他們的精神狀態和身體能力產生巨大影響。他們往往不希望依賴止痛藥，因為止痛藥可能有副作用，如頭暈、瞌睡、頭痛和惡心。不僅如此，止痛藥往往會阻斷整個身體的疼痛信號，這不一定是一件好事。當我們感到疼痛時，這是身體通知我們有問題的過程。感覺疼痛是很重要的，如果沒有這種感覺，往往會造成嚴重的後果，對身體的關鍵部位造成損害或傷害。如果能夠抑製身體中受影響最大的一個區域的疼痛，要安全得多。TENS止痛法就此誕生。它的工作原理是通過表面皮膚電極向神經纖維提供溫和的電子刺激。TENS刺激作為一個 "門控 "來阻斷疼痛的傳遞，阻止疼痛信號被發送到大腦。它只對需要治療的區域的神經起作用，而且沒有副作用。NeuroTrac是英國領先的TENS和EMS設備製造商之一，生產高質量、便於使用的醫療設備，在家中使用安全而簡單。NeuroTrac TENS有80%以上的效用，適用於任何類型的肌肉或關節疼痛。

規格：

雙通道：單獨隔離的電路。振幅：0-80毫安到500歐姆負載；僅有指示。由於電極阻抗的原因，實際毫安數往往低於指示值：在1000歐姆負載下（電極狀況不佳），最大將被限製為70毫安，在1500歐姆負載下，最大將被限製為65毫安。類型。恒定電流，最大輸出電壓180伏+10/-30伏。波形。不對稱，矩形雙相，直流電流為零。可選擇的脈沖寬度：50mS -300mS [2%精度]。脈沖速率選擇：在連續模式下2赫茲-200赫茲[2%的精度]。模式。連續、突發或調製。脈沖串模式。以150赫茲的頻率突發9個脈沖[200mS]，每秒鐘重復兩次。調製模式。6秒周期內同時進行寬度調製和脈沖重復率調製。寬度從200毫秒開始，在三秒內指數式下降到100毫秒，然後在接下來的三秒內返回到200毫秒。速率從100赫茲開始，按指數下降到65赫茲，然後返回到100赫茲。治療的時間長度可選擇。1分鐘到12小時。低電池指示器。如果電池低於6.9伏+/-0.2伏，電池符號將每秒閃爍一次。如果電池電壓低於6.6（+/- 0.2）伏，設備將不會開啟。電極開路檢測。如果在通道A或B的輸出端檢測到開路，輸出電流將被重置為零。

特點：

雙通道TENS

高效率的TENS裝置，高效緩解疼痛

12個預設程序和3個自定義程序，高靈活性來設置程序以滿足您的個人需求

改進的脈沖形狀，在高電流負荷下保持完整的形狀，從而改善疼痛的緩解。

鎖定模式，記錄使用時間和平均使用電流。

2年保修

經過驗證的TENS裝置可靠性

NeuroTrac TENS配備有：

1個9V電池

一包50mm x 50mm的皮膚電極

兩根導聯線

操作手冊

塑料手提箱

製造商只對機器提供一年的保修。