microFET® Digital HandGRIP Dynamometer - microFET® 數位手握測力計

About microFET® HandGRIP dynamometer

microFET® digital HandGRIP dynamometer is for healthcare professionals to measure handgrip strength forces to test and document grip deficits and to evaluate consistency of effort. microFET® handGRIP is designed with load cell sensors and electronic board to provide more accurate tool to measure hand strength in patients with hand trauma and dysfunction. Measurements are accurate and repeatable.

The wireless microFET® HandGRIP gauge is an accurate, portable and lightweight Force Evaluation and Testing (FET) device. The microFET® HandGRIP provides accurate and quantifiable results in identifying areas of weakness in the wrists, hands due to injury or disease. It is a versatile tool to anyone involved in rehabilitation, hand therapy, occupational therapy, upper extremity testing, geriatric care or ergonomic assessments.

microFET® hand grip dynamometer, by utilizing precision load cell sensors in its design, it eliminates the possibility of oil leakage or break down that can occur with hydraulic hand grips. Now with Bluetooth wireless capability, you can enjoy freedom from inconvenient cords or cables using the wireless HandGRIP with either microFET® software package or FDC FET Data Collection Research software.

Wireless microFET® HandGRIP Specifications:

1. The HandGRIP allows for the following tests: Maximum Grip, 5 Position Grip, Rapid Exchange Grip.
2. Easy To Read LCD Displays Show Peak Force and Elapsed Time
3. Selectable units of measure: pounds (lbs.), Newtons (N), or kilogram-force (kgf)
4. Low and high threshold settings: Low – 0.8 lb. to 200 lbs. in 0.1 lb. increments and High – 3 lbs. to 200 lbs. in 0.1 lb. increments
5. Accuracy within 1% of the reading
6. Bluetooth enabled for wireless use with either microFet or data collection research software.
7. Auto shutoff to conserve battery life.

Available microFET® software automatically performs calculations and validity checks, generates tables and graphs from testing data, creates high-impact session and comparison reports from patient tests, walks the clinician through selected tests or entire protocols, and provides built-in pictures to demonstrate proper gauge and patient positioning. The software is compatible with Windows operating systems XP or newer.

What’s Included

• Wireless microFET® HandGRIP Dynamometer
• User Manual
• Wall Pack Power Supply
• Calibration Certificate, 1 year standard warranty is included, with extended warranties available.
• Cloth Carrying Bag
• 1 year standard warranty is included, with extended warranties available.

關於 microFET® 手握測力計

microFET® 數位手握測力計是為醫療保健專業人士設計，用於測量握力強度，測試和記錄握力缺損，並評估努力的一致性。microFET® 手握測力計採用了負載傳感器和電子板，提供更準確的工具來測量手部受創和功能障礙患者的手部力量。測量結果準確且可重複。

無線 microFET® 手握測力計是一款準確、便攜且輕便的力學評估與測試（FET）設備。microFET® 手握測力計能提供準確且可量化的結果，用於識別由於受傷或疾病而導致的手腕和手部的虛弱區域。這是一個多功能的工具，適用於任何從事康復治療、手部治療、職業治療、上肢測試、老年護理或人體工學評估的人員。

microFET® 手握測力計採用精密的負載傳感器設計，消除了液壓手握測力計可能會發生油漏或故障的問題。現在具備藍牙無線功能，您可以使用無線手握測力計，通過 microFET® 軟體包或 FDC FET 數據收集研究軟體，享受擺脫不便電纜的自由。

無線 microFET® 手握測力計規格：

1. 手握測力計可進行以下測試：最大握力、5位置握力、快速交換握力
2. 易讀的 LCD 顯示器顯示峰值力量和經過時間
3. 可選單位：磅（lbs.）、牛頓（N）或公斤力（kgf）
4. 低閾值和高閾值設置：低閾值：0.8 磅至 200 磅，增量為 0.1 磅. 高閾值：3 磅至 200 磅，增量為 0.1 磅
5. 測量準確度：讀數誤差小於 1%
6. 支援藍牙功能，與 microFET 或數據收集研究軟體進行無線使用
7. 自動關閉功能以節省電池壽命

提供的 microFET® 軟體會自動執行計算和有效性檢查，根據測試數據生成表格和圖表，創建高影響力的會議報告和比較報告，指導臨床醫生完成選定的測試或整體測試方案，並提供內建圖片以演示正確的儀表和患者定位。該軟體與 Windows XP 或更新版本的操作系統兼容。

包含內容：

• 無線 microFET® 手握測力計
• 使用手冊
• 牆面電源供應器
• 校準證書
• 1 年標準保固，並提供延長保固選項
• 帆布攜帶袋
• 1 年標準保固，並提供延長保固選項